RAHA Water Treatment Corporation
Home Products Services About Inquiry Search Contact

Home | Products | Deionizer Controls

Deionizer Control Systems

Click here to go to Softeners Section...

RAHA provides you the all types of deionizer systems to solve your problems that deal with your particular water applications.

  • Deionizers are equipped with high hardness removal capacity resins, automatic regeneration scientifically adjusted to your specific requirements.

  • The rate of maintenance is minimum and installation of the unit does not require complicated tools or equipment.

  • Our engineers and reliable technicians install and supervise if necessary.

  • We provide for you excellent and fully qualified technical advise to help and solve water problems and your needs shall be attended after sales services.

Deionizer Control System

Check-out the Following:



730 Series Deionization

An economical alternative to rental exchange deionization (DI), the Osmonics Autotrol series 730 control provides dependable, semi-automatic performance in lighter duty applications.

Depending on your type of use and the quality of your influent water, the series 730 control can lower your cost of deionized water by as much as one-half when compared with the cost of exchange service.

730 Series Deionization
730 Series Deionization
Flow Rates: 2 to 6 gpm, (7.6 to 22.7 Lpm)
Exchange Capacities: 20 to 40 kilograins

Features such as automatic shutoff in case of power failure, and check valves to prevent the accidental flow of water into the regenerant containers, add to the 730 control's performance appeal. And, the unit's specially adapted valves, electronics, meters, piping and fittings all come preassembled for quick, easy installation.

Features:

    • Automatic regeneration after manual initiation.
    • Constant monitoring of final water quality.
    • Solid-state reliability for trouble-free service.
    • No untreated bypass water.
    • Automatic shutoff in event of power failure.
    • Compact, noncorrosive components.
    • Convenient, modular construction.
    • Easy, economical installation.

730 Series Deionization

Specifications:

Model Tank Size
(Inches)
Flow Rates
gpm
(Lpm)
Delta P at
Nominal
Flow Rates
psi (bar)
Exchange
Capacity
(Grains CaCO3)
Resin Volume
Each Tank
(Ft³)
Approximate
Overall
Dimensions
H x L x W Inches
(cm)
730-09 9 x 48 2 - 3
(7.6 - 11.4)
19
(1.3)
20,000 1.0 57-3/4 x 22
x 14-1/2
(147.7 x 55.9 x 36.8)
730-10 10 x 54 3 - 4
(11.4 - 15.1)
20
(1.4)
30,000 1.5 63-3/4 x 23
x 14-1/2
(161.9 x 58.4 x 36.8)
730-12 12 x 48 4 - 6
(15.1 - 22.7)
21
(1.4)
40,000 2.0 57-3/4 x 25
x 14-1/2
(147.7 x 63.5 x 36.8)

7700 Series Deionization

Engineered for medium-sized deionization (DI) applications, these dependable units feature the same precision electronics and performance characteristics as their large-scale counterparts, all in a smaller, top-mounted package. Applications cover the full spectrum of industrial, commercial, medical and agricultural users. The 168 valve gives Osmonics Autotrol 7700 series controls improved performance characteristics.

7700 Series Deionization
7700 Series Deionization
Flow Rates: 2 to 12 gpm, (7.6 to 45.4 Lpm) Exchange Capacities: 20 to 70 kilograins

Features:

  • Custom programmable for automatic precision and simplicity.
  • Delivers duplex DI water more economically than any other deionizer.
  • The most advanced DI control package available.
  • No other DI controls offer so much performance at such a low price.
  • The digital-type meter displays both water quality and regeneration time remaining . . . a unique combination that simplifies system process planning.
  • A third tank polisher can be accommodated under the single control to pick up sodium or silica leakage, allowing you to easily attain higher purity water at less expense.
  • A single set of printed circuit boards control both simultaneous and sequential regeneration. You simply select the desired regeneration mode with DIP switches.
  • All programming features are easily accessible on the front panel, so there's no need to enter the control box and disrupt operations.
  • Indicator lights show at a glance which phase of the regeneration cycle the system is in.
  • Direct eduction of chemicals through the multiport valves eliminates additional chemical draw valves
  • Automatic prerinse prior to regeneration prevents false regeneration and preserves chemicals.
  • Monitored final rinse rids the system of residual chemicals before the deionizer returns to service.
  • Convenient test ports allow sampling of decationized and final DI water for quick, easy checks of system performance.
  • Modular construction reduces downtime and simplifies troubleshooting and service.
  • Rugged NEMA 12 electrical enclosures, standard on all controls, meet or exceed NEMA showering arc (ICS 2-230), surge withstand (IEEE 587) and electrostatic discharge (MIL-STD-88380).
  • Automatic shutoff during power failure prevents resins from being exhausted past their quality endpoint.
  • NOVRAM backup saves all data during a power failure, then returns the display to the last data point when power is restored. No batteries are required.
  • A low level sensor can be easily wired into the control to warn of low chemical volumes.
  • Provisions for a remote control panel and auxiliary "START REGENERATION" source allow regeneration to be initiated and controlled from a location remote from the actual installation site.
  • Level controlled shutoff to a product storage tank can be utilized with the addition of a simple float switch in the storage tank.
  • Relays and fuses on the power printed circuit board provide for the operation of recirculation and supply pumps.

  • 7710 DI Specifications:

    Model Tank
    Size
    (Inches)
    Flow
    Rates
    gpm
    (Lpm)
    Delta P at
    Nominal
    Flow Rates
    psi (bar)
    Exchange
    Capacity
    (Grains CaCO3)
    Resin
    Volume
    Each Tank
    (Ft³)
    Approximate
    Overall
    Dimensions
    H x L x W Inches, (cm)
    7710-09 9 x 48 2 -3
    (7.6 - 11.4)
    19 (1.3) 20,000 1 60 x 23 x 27, (152.4 x 58.4 x 68.6)
    7710-13 13 x 54 4 - 7
    (15.1 - 26.5)
    20 (1.4) 50,000 2.5 66 x 31 x 29, (167.6 x 78.7 x 73.7)
    7710-14 14 x 65 7 - 10
    (26.5 - 37.9)
    23  (1.6) 70,000 3.5 77 x 33 x 29-½, (195.6 x 83.8 x 74.9)

    7720 DI Specifications:

    Model Tank
    Size
    (Inches)
    Flow
    Rates
    gpm, (Lpm)
    Delta P at
    Nominal
    Flow Rates
    psi (bar)
    Exchange
    Capacity
    (Grains CaCO3)
    Resin
    Volume
    Each Tank
    (Ft³)
    Approximate
    Overall
    Dimensions
    H x L x W Inches, (cm)
    7710-09 9 x 48 2 -3, (7.6 - 11.4) 19 (1.3) 20,000 1 60 x 23 x 27, (152.4 x 58.4 x 68.6)
    7710-13 13 x 54 4 - 7, (15.1 - 26.5) 20 (1.4) 50,000 2.5 66 x 31 x 29, (167.6 x 78.7 x 74.9)
    7710-14 14 x 65 7 - 10, (26.5 - 37.9) 23 (1.6) 70,000 3.5 77 x 33 x 29-½, (195.6 x 83.8 x 74.9)

    7750 DI Specifications:

    Model Tank
    Size
    (Inches)
    Flow
    Rates
    gpm, (Lpm)
    Delta P at
    Nominal
    Flow Rates
    psi  (bar)
    Exchange
    Capacity
    (Grains CaCO3)
    Resin
    Volume
    Each Tank
    (Ft³)
    Approximate
    Overall
    Dimensions
    H x L x W Inches, (cm)
    7750-14 14 x 65 10 - 12, (37.9 - 45.4) 14  (1.0) 70,000 3.5 77 x 24 x 33, (195.6 x 61.0 x 83.8)

    7760 DI Specifications:

    Model Tank
    Size
    (Inches)
    Flow
    Rates
    gpm, (Lpm)
    Delta P at
    Nominal
    Flow Rates
    psi (bar)
    Exchange
    Capacity
    (Grains CaCO3)
    Resin
    Volume
    Each Tank
    (Ft³)
    Approximate
    Overall
    Dimensions
    H x L x W Inches, (cm)
    7760-14 14 x 65 12 - 10, (45.4 - 37.9) 14 (1.0) 70,000 3.5 77 x 33 x 27, (195.6 x 83.8 x 68.6)

    7800 Series Deionization



    Designed and built for maximum deionization (DI) demands, these high-capacity controls can easily handle the heaviest requirements of manufacturing and medical applications, as well as those of large-scale commercial users such as printing or food processing plants, electroplating or metal finishing facilities and high-volume car and truck wash installations.

    Features:

  • Custom programmable for automatic precision and simplicity.
  • Delivers duplex DI water more economically than any other deionizer.
  • The most advanced DI control package available.
  • No other DI controls offer so much performance at such a low price.
  • 7800 Series Deionization
    7800 Series Deionization
    Flow Rates: 10 to 75 gpm (37.9 to 283.9 Lpm) Exchange Capacities: 100 to 500 kilograins
    • The digital-type meter displays both water quality and regeneration time remaining . . . a unique combination that simplifies system process planning.
    • A third tank polisher can be accommodated under the single control to pick up sodium or silica leakage, allowing you to easily attain higher purity water at less expense.
    • A single set of printed circuit boards control both simultaneous and sequential regeneration. You simply select the desired regeneration mode with DIP switches.
    • All programming features are easily accessible on the front panel, so there's no need to enter the control box and disrupt operations.
    • Indicator lights show at a glance which phase of the regeneration cycle the system is in.
    • Direct eduction of chemicals through the multiport valves eliminates additional chemical draw valves.
    • Automatic prerinse prior to regeneration prevents false regeneration and preserves chemicals.
    • Monitored final rinse rids the system of residual chemicals before the deionizer returns to service.
    • Convenient test ports allow sampling of decationized and final DI water for quick, easy checks of system performance.
    • Modular construction reduces downtime and simplifies troubleshooting and service.
    • Rugged NEMA 12 electrical enclosures, standard on all controls, meet or exceed NEMA showering arc (ICS 2-230), surge withstand (IEEE 587) and electrostatic discharge (MIL-STD-88380).
    • Automatic shutoff during power failure prevents resins from being exhausted past their quality endpoint.
    • NOVRAM backup saves all data during a power failure, then returns the display to the last data point when power is restored. No batteries are required.
    • A low level sensor can be easily wired into the control to warn of low chemical volumes.
    • Provisions for a remote control panel and auxiliary "START REGENERATION" source allow regeneration to be initiated and controlled from a location remote from the actual installation site.
    • Level controlled shutoff to a product storage tank can be utilized with the addition of a simple float switch in the storage tank.
    • Relays and fuses on the power printed circuit board provide for the operation of recirculation and supply pumps.

    7840 DI Specifications:

    Model Tank
    Size

    (Inches)
    Flow Rates
    gpm, (Lpm)
    (delta)P at Nominal
    Flow Rates
    psi (bar)
    Exchange
    Capacity
    (Grains CaCO3)
    Resin Volume
    Each Tank
    (Ft³)
    Approximate Overall
    Dimensions
    H x L x W Inches (cm)
    7840-21 21 x 62 10 - 15, (37.9 - 56.8) 22 (1.5) 100,000 5 66-1/2 x 91-1/2 x 25
    (168.9 x 232.4 x 63.5)
    7840-24 24 x 71 20 - 30, (75.7 - 113.6) 25 (1.7) 200,000 10 75-1/2 x 97-1/2 x 28
    (191.8 x 247.7 x 71.1)
    7840-30 30 x 72 30 - 45, (113.6 - 170.3) 28 (1.9) 300,000 15 81-1/2 x 109-1/2 x 31
    (207.0 x 278.1 x 78.7)
    7840-36 36 x 72 40 - 60, (151.4 - 227.1) 32 (2.2) 400,000 20 81-1/2 x 121-1/2 x 40
    (207.0 x 308.6 x 101.6)
    7840-50 36 x 72 50 - 75, (189.3 - 283.9) 36 (2.5) 500,000 25 81-1/2 x 121-1/2 x 40
    (207.0 x 308.6 x 101.6)

    7850 DI Specifications:

    Model Tank Size
    (Inches)
    Flow
    Rates
    gpm, (Lpm)
    (delta)P at
    Nominal
    Flow Rates
    psi (bar)
    Exchange
    Capacity
    (Grains CaCO3)
    Resin
    Volume
    Each Tank
    (Ft³)
    Approximate
    Overall
    Dimensions
    H x L x W Inches (cm)
    7850-21 21 x 62 10 - 15, (37.9 - 56.8) 22 (1.5) 100,000 5 66-1/2 x 91-1/2 x 2,
    (168.9 x 232.4 x 63.5)
    7850-24 24 x 71 20 - 30, (75.7 - 113.6) 25 (1.7) 200,000 10 75-1/2 x 97-1/2 x 28
     (191.8 x 247.7 x 71.1)
    7850-30 30 x 72 30 - 45, (113.6 - 170.3) 28 (1.9) 300,000 15 81-1/2 x 109-1/2 x 31
     (207.0 x 278.1 x 78.7)
    7850-36 36 x 72 40 - 60, (151.4 - 227.1) 32 (2.2) 400,000 20 81-1/2 x 121-1/2 x 40
     (207.0 x 308.6 x 101.6)
    7850-50 36 x 72 50 - 75, (189.3 - 283.9) 36 (2.5) 500,000 25 81-1/2 x 121-1/2 x 40
     (207.0 x 308.6 x 101.6)

    :: Specifications mentioned here may change and subject to confirmation from the manufacturer ::
    Source: GE Water

    [Home] [Products] [Services] [Feedback] [Inquiry] [About Us] [Contact Us] [Search] [Sitemap]